Threaded Connection Method
This product adopts a threaded connection structure. During the installation process, you only need to use a wrench to screw the joint into the pipeline. No welding, drilling or complex centering positioning is required. It can usually be fixed in place within 3 minutes. In contrast, flange connections require multiple bolts, gaskets and manual centering.

High Pressure Resistance
The stainless steel shell of the rotating pipe coupling is integrally forged and then CNC turned. This weld-free structure can avoid the weak strength area caused by stress concentration in the welding part, making the product have a maximum pressure of up to 1.5MPa, which is suitable for most industrial medium and high pressure fluid systems.

Good Sealing
The rotating pipe coupling adopts a mechanical seal structure, and its sealing surface is tightly fitted through the axial spring preload, and the fitting gap is about 0.25~0.5 μm. Therefore, the leakage of the device during long-term operation under 1.5 MPa pressure and 180°C high temperature environment is less than 0.01 ml/min, which is much smaller than the industry standard of 0.05 ml/min.